LEGACY PRODUCTS

STUDIO LED X6 - LED FRESNEL 250W DAYLIGHT

The STUDIO LED X SERIES range combines the matchless features of the renowned QUARTZCOLOR Fresnel spotlights with the advantages of the LED technology innovation.

A high performing professional LED Fresnel spotlight range whose light output is equivalent to a traditional halogen source and permits a one-for-one replacement without compromises in the quality of the light: same brightness, same smoothness, same even and shadowless illumination as a traditional Fresnel spotlight.


Investing in LED fixtures brings immediate benefits in terms of savings: dramatically reduced power consumption, 50,000+ hours LED engine life vs 150 hours of a traditional halogen lamp, reduced AC requirements, no dimmers required, practically no maintenance and spare parts required thanks to the lack of heat.

 


Product Code LD27360D
Category LEGACY PRODUCTS
Brand Quartzcolor logo

STUDIO LED X6 - LED FRESNEL 250W DAYLIGHT

LD27360D

  • LCD GRAPHIC DISPLAY

    High-resolution LCD graphic display to operate and control system status, LED internal temperature, current DMX settings, dimming level both in remote and manual mode, and display standby.

  • BUILT-IN UNIVERSAL POWER SUPPLY

    More compact for easy operation.

  • ON-BOARD CONTROL

    On-board potentiometer to control the dimming level. 

  • DMX RDM CONTROL

    The RDM standard provides bi-directional feedback and the possibility to remotely assign and address all the fixtures in a DMX network. 

  • 16-bit ELECTRONIC DIMMING

    Fully dimmable 0 – 100 %. The 16-bit electronic driver ensures accurate and precise dimming.

  • ON-BOARD USB-PORT

    On-board USB port for firmware upgrade, diagnostic testing, and parameters setting via PC dedicated software.
     


  • Optimised combination of steel, die cast and aluminium for both sturdiness and lightweight
  • High-quality epoxy powder coating protects against corrosion
  • Scratch resistant black non-reflective housing
  • Specifically designed optics with large size lens
  • Side mounted pole operated focus mechanism easily repositioned to manual use
  • Stainless steel wire focus system for a smooth and precise focusing action, maintenance-free
  • High-efficiency convection cooling, super silent fan, 3 presetting fan speed
  • Die cast aluminium accessory support brackets positioned in an X shape for true barndoor rotation
  • Easy running accessory support brackets and lower accessory support bracket fitted with barndoor safety catch (extra safety)
  • Spring loaded top hinged bracket for very quick opening and closing, and for easy accessory fitting and removal
  • Hinged lens door allows easy access for lamp replacement
  • Front rigging hook
  • Easy to service and maintain
  • Compatibility of parts throughout the range
  • CE mark
  • Designed and manufactured in Italy

Ordering Codes

LD27360D - Studio LED X6 Fresnel 250W CCT Daylight MO supplied with manual stirrup, stainless steel safety mesh, four-leaf rotating barndoor

LD27362D - Studio LED X6 Fresnel 250W CCT Daylight PO supplied with pole operated stirrup, stainless steel safety mesh, four-leaf rotating barndoor


STUDIO LED X6 - LED FRESNEL 250W DAYLIGHT

LD27360D

Operational Data

Power consumption

250 W

Supply voltage

100 – 260 Vac, 50 – 60 Hz, autosensing
Power factor (cosα) 0.97

Tilt adjustment

Pivot located at centre of gravity for excellent balance and positive locking

Tilt recommended angle of use

-90° / 0° / 90°
Focus adjustment

Stainless steel, maintenance-free wire focus mechanism with a wire and pulley push/pull carriage travel system 
Side mounted pole operated focus mechanism

Accessory fitting

Spring loaded top hinged bracket

Lower accessory support bracket fitted with barndoor safety catch (extra safety)

Barndoor diameter

323 mm

Colour frame/scrim set diameter

325 mm

Filter cut size diameter

320 mm

Safety mesh

Stainless steel safety mesh 25 mm x 25 mm

IP rating

IP 20

Max operating ambient temperature

0° – 40°

Optical Data

Lens

Fresnel 250 mm Ø, low expansion borosilicate Fresnel lens on spring Teflon supports

Beam angle

12° to 65°
Correlated color temperature 5600 K
CRI > 90

Mechanical Data

Finish

Black high-quality epoxy powder coating

Special extra high-temperature treatment in critical areas

External textured low gloss finish

MO mounting

Manual U-shaped stirrup with lateral thrust bearing and lock off knob for quick and secure locking, 28 mm (1 1/8”)

PO mounting

Pole Operated U-shaped stirrup, pan & tilt clutch gear mechanism for manual override, 28 mm (1 1/8") spigot

Electrical

Dimming Electronic 16-bit, 0 – 100 % fully adjustable
Control Local via potentiometer
Remote via DMX-RDM
Setting, addressing and testing via control panel, via RDM, and via USB port
Connections DMX In and Through 5-Pin XLR, USB port for firmware and software upgrade
MO version

In-line switch 10 A / 250 V, 5 m bare ended cable, 3 x 1.5 mm2 section cable
Plugs and cables upon request

PO version

2 m bare ended, 3 x 1.5 mmsection cable

Plugs and cables upon request

Dimensions

Weight (head)

13.8 kg manual version

14.7 kg pole op version 

Packed volume

580 mm x 480 mm x 590 mm 


Photometrics

Spot (12°)
Distance (m) 3 4 5 7 9
Lux 13,250 7,453 4,770 2,434 1,472
Beam Ø (m) 0.63 0.84 1.05 1.47 1.89
Flood (65°)
Distance (m) 3 4 5 7 9
Lux 2,100 1,181 756 386 233
Beam Ø (m) 3.82 5.10 6.37 8.92 11.47
Typical performance based on 5600 K

STUDIO LED X6 - LED FRESNEL 250W DAYLIGHT

LD27360D

28070

Four-leaf rotating barndoor - 323 mm Ø

28093

Colour frame - 325 mm Ø

28306

Scrim set (one double, one single scrim, one half double scrim, one half single scrim) - 325 mm Ø

C100

Junior pipe clamp with 28 mm socket

FF3871         

Steel safety cable - Ø 4 mm - 70 cm length

A1020B

Aluminium stand, 2 risers, 110/198 cm, 28/16 mm socket, black, 25 kg load

087NW

Wind up steel chrome stand, 2 risers, 167/370 cm, 28/16 mm socket, 30 kg load


STUDIO LED X6 - LED FRESNEL 250W DAYLIGHT

Catalogue
Studio LED X Series
Data sheet
Studio LED X6

Get more information about this product!

Speak with us about any other questions you might have.


I Agree the Privacy Policy of this site *