RETROFIT KIT 150W FOR STUDIO FRESNEL 1kW
The RETROFIT KIT allows to quickly and easily upgrade QUARTZCOLOR BAMBINO and STUDIO Fresnel spotlights with new energy efficient LED technology.
An extremely cost-effective solution to significantly reduce operational and maintenance costs without changing the existing layout and removing the fixtures from their suspension system.
Just remove four screws to separate the top of the housing from the bottom and replace the whole bottom part with the new one preassembled with LED engine.
New labels and plates are supplied together with the kit.
Investing in LED fixtures will bring immediate benefits in terms of savings: dramatically reduced power consumption, 50,000+ hours LED engine life vs 150 hours of a traditional halogen lamp, reduced AC requirements, no dimmers required, practically no maintenance and spare parts required thanks to the lack of heat.
| Product Code | LD27252T/1 LD27252D/1 |
|---|---|
| Category | LEGACY PRODUCTS |
| Brand |
|
RETROFIT KIT 150W FOR STUDIO FRESNEL 1kW
LD27252T/1 LD27252D/1
- LCD GRAPHIC DISPLAY
High-resolution LCD graphic display to operate and control system status, LED internal temperature, current DMX settings, dimming level both in remote and manual mode, and display standby.
- BUILT-IN UNIVERSAL POWER SUPPLY
More compact for easy operation.
- ON-BOARD CONTROL
On-board potentiometer to control the dimming level.
- ON-BOARD DMX RDM CONTROL
The RDM standard provides bi-directional feedback and the possibility to remotely assign and address all the fixtures in a DMX network.
- 16-bit ELECTRONIC DIMMING
Fully dimmable 0-100%. The 16-bit electronic driver ensures accurate and precise dimming.
- ON-BOARD USB-PORT
On-board USB port for firmware upgrade, diagnostic testing and parameters setting via PC dedicated software.
- Optimised combination of steel, die cast and aluminium for both sturdiness and lightweight
- High-quality epoxy powder coating protects against corrosion
- Side mounted pole operated focus mechanism easily repositioned to manual use
- Stainless steel wire focus system for a smooth and precise focusing action, maintenance-free
- High-efficiency convection cooling, super silent fan, 3 presetting fan speed
- Easy to service and maintain
- CE mark
- Designed and manufactured in Italy
Ordering Codes
LD27252T/1 – Retrofit kit 150W Tungsten for Studio Fresnel 1kW supplied with upgrade label kit
LD27252D/1 – Retrofit kit 150W Daylight for Studio Fresnel 1kW supplied with upgrade label kit
RETROFIT KIT 150W FOR STUDIO FRESNEL 1kW
LD27252T/1 LD27252D/1
|
Operational Data |
|
|
Power consumption |
150 W |
|
Supply voltage |
100 – 260 Vac, 50 – 60 Hz, autosensing |
| Power factor (cosα) | 0.97 |
| Focus adjustment |
Stainless steel, maintenance-free wire focus mechanism with a wire and pulley push/pull carriage travel system for spot and flood Side mounted pole operated focus mechanism |
|
IP rating |
IP 20 |
|
Max operating ambient temperature |
0° – 40° |
|
Optical Data |
|
|
Beam angle |
15° to 43° (3200 K) 15° to 44° (5600 K) |
| Correlated color temperature | Fixed 3200 K / 5600 K |
| CRI | > 90 |
|
Mechanical Data |
|
| Finish |
Black high-quality epoxy powder coating Special extra high-temperature treatment in critical areas External textured low gloss finish |
|
Electrical |
|
| Dimming | Electronic 16-bit, 0 – 100 % fully adjustable |
| Control | Local via potentiometer Remote via DMX-RDM Setting, addressing and testing via control panel, via RDM, and via USB port |
| Connections |
DMX In and Through 5-Pin XLR USB port for firmware and software upgrade |
| Cabling |
In-line switch 8 A / 250 V, 5 m bare ended cable, 3 x 1.5 mm2 section cable |
|
Dimensions |
|
| Weight |
4.9 kg manual version |
Photometrics
| Typical performance based on 3200 K | |||||
| Spot (15°) | |||||
| Distance (m) | 3 | 4 | 5 | 7 | 9 |
| Lux | 3,970 | 2,233 | 1,429 | 729 | 441 |
| Beam Ø (m) | 0.79 | 1.05 | 1.32 | 1.84 | 2.37 |
| Flood (43°) | |||||
| Distance (m) | 3 | 4 | 5 | 7 | 9 |
| Lux | 1,350 | 759 | 486 | 248 | 150 |
| Beam Ø (m) | 2.36 | 3.15 | 3.94 | 5.51 | 7.09 |
| Typical performance based on 5600 K | |||||
| Spot (15°) | |||||
| Distance (m) | 3 | 4 | 5 | 7 | 9 |
| Lux | 4,700 | 2,644 | 1,692 | 863 | 522 |
| Beam Ø (m) | 0.79 | 1.05 | 1.32 | 1.84 | 2.37 |
| Flood (44°) | |||||
| Distance (m) | 3 | 4 | 5 | 7 | 9 |
| Lux | 1,560 | 878 | 562 | 287 | 173 |
| Beam Ø (m) | 2.42 | 3.23 | 4.04 | 5.66 | 7.27 |